x
Send Your Inquiry Today
Quick Quote

Your information will be kept strictly confidential.

BLDC Motor VS PMSM: What’s The Difference?

When selecting motors for your device, you may find that BLDC motors and PMSM motors are suitable for the same power range. Although BLDC motors and PMSM motors have similar appearances, there are significant differences between them. This article will provide a detailed comparison of these two types of motors and teach you how to choose the suitable motor.

What Is The BLDC Motor?

The full name of the BLDC motor is a brushless DC motor. A BLDC motor is a permanent-magnet motor that uses electronic commutation instead of mechanical brushes and a commutator. The motor controller switches the stator windings according to the rotor position to generate continuous rotation.

BLDC Motor Structure

What Is The PMSM Motor?

The full name of the PMSM motor is a permanent magnet synchronous motor. It adopts the structure of a permanent magnet rotor and stator winding, just like the BLDC motor. PMSM motors typically generate a near-sinusoidal back-EMF waveform and are commonly driven using sinusoidal current control or field-oriented control (FOC).

PMSM motor structure

What Are The Differences Between BLDC And PMSM?

When comparing the differences between BLDC motors and PMSM motors, you need to consider multiple aspects comprehensively. Only in this way can you choose the motor that is most suitable for your product.

Quick Comparison Table

AspectsBLDC MotorsPMSM Motors
Waveform of back electromotive forceTypically trapezoidalTypically sinusoidal
Control methodTypically six-step commutationSinusoidal current control /FOC
Torque rippleGenerally higher, especially with six-step commutationGenerally lower with sinusoidal current control/FOC
Control complexity Relatively simple commutation logicMore sophisticated control algorithms and real-time computation
EfficiencyHigh efficiency is possible, especially when approaching the rated operating pointHigh efficiency over a broad operating range can be achieved with optimized motor and FOC design
System costGenerally lower controller complexity and costDrive and feedback requirements can increase total system cost

Back Electromotive Force

The back electromotive force is one of the key differences between BLDC motors and PMSM motors. Simply put, it is a voltage generated internally by the motor after it rotates, with the direction opposite to the external power supply voltage.

The back electromotive force of a BLDC motor is usually a trapezoidal wave, and the voltage changes in a stepwise manner. The trapezoidal waveform works well with six-step commutation, but the discrete switching process can introduce torque ripple, current ripple, acoustic noise, and EMI depending on the motor and drive design.

The back electromotive force of a PMSM motor is usually a smoother sine waveform. Its voltage transition is continuous and without sudden changes, providing the basic conditions for its smooth operation.

Control Method

The BLDC motor typically adopts the classic six-step commutation control. BLDC drives determine or estimate the rotor position and use this information to sequence phase commutation.

Hall sensors are commonly used in sensored BLDC systems, while sensorless drives can estimate rotor position from electrical signals such as back-EMF. This approach uses relatively simple control logic and generally requires fewer computational resources.

Six-step commutation control

PMSM motors mainly use field-oriented control (FOC). It needs to collect real-time information such as current, speed, and position, and then accurately split the excitation current and torque current through algorithms to achieve precise speed regulation and torque control.

PMSM systems are generally better suited to applications requiring precise torque and speed control when paired with an appropriate FOC drive and position feedback.

FOC control of PMSM

Torque Ripple

Torque ripple is an important factor in evaluating motors, as it directly affects the operational stability of the motor. Due to the phased characteristics of six-step commutation, BLDC motors may experience sudden torque changes during commutation. This can result in noticeable torque ripple during operation, which is more prominent at low speeds.

PMSM motors benefit from their sinusoidal driving characteristics, which can make torque output more continuous and uniform. PMSM can generally achieve lower torque ripple and smoother torque output, especially with properly tuned sinusoidal control or FOC.

Complexity Of Control System

The control system structure of a brushless DC motor is simple. Its control logic is simple, and the calculation requirements are not high. It can use Hall sensors to determine position, making the implementation and adjustment of the system relatively simple. In addition, it has few peripheral circuits and is easy to debug.

PMSM drives generally require more sophisticated control algorithms and real-time current and position information, which can increase computational and system-integration requirements. Its operation requires precise sensor sampling and real-time computation. Its system integration is high, debugging is difficult, and the requirements for technical adaptability are also relatively high.

Efficiency

Neither BLDC nor PMSM should be selected based on efficiency alone. A well-designed BLDC motor can achieve high efficiency, particularly around its intended operating point. PMSM systems can also deliver high efficiency over a broad speed and load range when the electromagnetic design and FOC parameters are upgraded.

Cost

From the perspective of equipment cost, the price of PMSM motors is usually higher than BLDC motors. The structure of the BLDC motor is relatively simple, and its controller price is also low. This makes it relatively cost-effective.

PMSM motors usually have higher overall costs. Because they can require more sophisticated electromagnetic design, current sensing, position feedback, motor-drive tuning, and FOC-capable controllers. The actual cost difference depends on the motor specification and system architecture. So if you are looking to purchase a PMSM motor, you had better consider the cost of them in advance.

Both BLDC motors and PMSM motors are brushless and do not require regular replacement of brushes and mechanical commutators. Therefore, the maintenance costs are usually low.

However, it is worth noting that the control system of BLDC motors is simple. It makes maintenance and troubleshooting easier. The maintenance cost of PMSM motors may be higher than that of BLDC motors.

Application Areas

BLDC motors are usually used in applications that cost, compact size, simple electronic commutation, and reliable speed control are important. Typical applications include fans, cooling systems, pumps, compressors, power tools, and various automation devices.

BLDC Applications

PMSM motors are often selected when low torque ripple, precise speed or torque control, low noise, or high efficiency over a broad operating range is necessary for equipment. Their common applications include industrial drives, robotics, AGVs, compressors, electric vehicle traction systems, and pumps.

PMSM Application

How To Choose The Right Motor For You?

When choosing a motor, you cannot simply compare the cost or power of the motor. You should consider many different aspects comprehensively and then choose the motor that is most suitable for you.

Analyze Your Equipment

When choosing the motors, what you must do is analyze the requirements of your equipment. Different demands result in different motor choices.

If your application primarily requires cost-effective speed control and operates within a relatively predictable range of speed and load, then BLDC motors are sufficient.

If your application requires low-speed stability, low torque ripple, precise speed or torque control, or a wide operating range, then PMSM motors are a better choice.

Compatibility Of Motor And Controller

When choosing a motor, the controller must be considered simultaneously. Before purchasing, what you need to do is confirm the rated voltage, rated current, back electromotive force characteristics, communication interface, and other information.

If you want to purchase PMSM motors, you have to make sure that your controller supports the FOC functions and position feedback it requires. For BLDC motors, it is necessary to make sure the controller supports the corresponding commutation method.

Evaluate Overall Cost

No matter which motor is chosen, budget is an important factor that you shouldn’t ignore. If your budget is relatively low and you need a large number of motors, then I suggest you choose BLDC motors. Their procurement cost is relatively low, and their cost-effectiveness is high.

If you have a sufficient budget and you want to improve the performance of your equipment, such as control accuracy or low-speed torque output, then PMSM motors are your best choice.

Capability Of The Supplier

Choosing a reliable supplier is a very important step. If the chosen supplier is unreliable, it may cause you a series of losses. Before choosing a supplier, you need to focus on whether it has relevant industry experience, whether the after-sales service system is complete, and whether there is a reliable technical team, etc.

FAQ

Can PMSM Motors And BLDC Motors Be Interchangeable?

No. A BLDC motor and a PMSM can not replace each other. Their back-EMF characteristics, commutation strategy, winding parameters, feedback requirements, and controller settings may differ.

Before replacing them, you should verify motor parameters and confirm driver compatibility.  If forcibly replaced, it may cause the motor to malfunction. If it is necessary to replace both, then the motor and controller need to be replaced together.

Is There A Significant Difference In Their Service Life?

The difference in service life between the two is not significant. The specific lifespan depends on many factors, such as bearing selection, operating load, thermal design, speed, insulation system, cooling, and controller settings.

What Is The Difference Between Sensorless And Sensor-Based BLDC/PMSM Motors?

Motor equipment equipped with sensors obtains the position of the rotor through Hall/encoder sensors. Sensor-based motors provide accurate rotor-position feedback. They can improve the motor’s low-speed control and performance when properly matched with the drive system.  But their cost is relatively high. It is more suitable for devices that need higher precision, such as AGVs and robots.

Motors without sensors typically rely on the back electromotive force of the motor to determine their specific position. It has a simple structure and low cost. However, their startup and low-speed performance are relatively poor, and it is usually suitable for ordinary devices at medium to high speeds.

Which Motor Has Lower Torque Ripple?

PMSM generally has lower torque ripple when driven with properly tuned sinusoidal current/FOC, while six-step BLDC control can produce greater torque ripple during commutation.

Actual torque ripple also depends on motor electromagnetic design and controller tuning. In practical operation, you can reduce the torque ripple of brushless DC motors through motor electromagnetic design, optimized commutation, current shaping, and appropriate control strategies.

Can BLDC Motors Operate With FOC Sine-wave Controllers?

Yes. BLDC motors can be operated by FOC sine-wave drivers. But what should be noted is that BLDC motors may not achieve the low torque ripple effect of PMSM motors when using sine-wave drivers.

Before use, it is best to complete a matching test between the motor and the driver.

Final Thought

BLDC motors and PMSM motors each have their own advantages.  Different motor choices may cause different overall operating experience and efficiency of the machine. BeUDMKE has extensive experience in the field of motor research and production. If you want to purchase high-quality motors, please feel free to contact us.

Looking for a reliable partner for motors and drivers in China?

Contact our engineers immediately to get the most suitable motor motion control solution for your equipment now!
Scroll to Top