Model: 57P2L4004D4-L
DMKE 86mm 2n.m torque nema 34 stepper motor specification
Type: 86mm 2n.m torque nema 34 stepper motor
Application:3D printing
Frame size:42*42mm
Number of leads: 4
Step angel(degree): 1.8
Holding torque(N.m): 0.4
Rated voltage(V):3.3
Phase current(A):1.5A
Resistance(Ω):2.2
Inductance(MH):3.8
Motor length: 40mm
Contact us for quote now:
Shirley Fu
Tel#/WhatsApp: 86-13640275665
Email: shirley.fu@beudmke.com
Shirley Fu
Tel#/WhatsApp: 86-13640275665
Email: shirley.fu@beudmke.com
- Model Selection
- Size Drawing
- Product show
- Other Series
- Contact Us
| Model | Step Angle(degree) | Holding Torque (Nm) | Phase Current (A) | Resistance(Ω) | Inductance(MH) | Shaft Diameter (mm) | Shaft Length (mm) | Motor Length (mm) |
| 85P2L6860D4 | 1.8 | 3.4 | 6 | 0.35 | 1.7 | 9.5 | 30 | 68 |
| 85P2L8060D4 | 1.8 | 4.5 | 6 | 0.35 | 3.2 | 12.7 | 30 | 80 |
| 85P2L9760D4 | 1.8 | 7 | 6 | 0.44 | 3.3 | 12.7 | 30 | 97 |
| 85P2L11860D4 | 1.8 | 8.5 | 6.3 | 0.57 | 5 | 12.7/14 | 30 | 118 |
| 85P2L15160D4 | 1.8 | 10 | 6 | 0.7 | 8.3 | 14 | 35 | 151 |
| 85P2L15560D4 | 1.8 | 12 | 6 | 0.5 | 5.5 | 14 | 32 | 156 |
Use environment and parameters
| Cooling way | Natural cooling or forced air cooling |
| Environment situation | Do not put it beside other heating equipment.Do not put it beside other heating equipment.gas.If the humidity is too high and the vibration conductive dust is prohibited. 请勿放置在其他加热设备旁边。请勿放置在其他加热设备旁边。气体。如果湿度过高 |
| Operating Temperature | 0℃-+40℃ |
| Humidity | 90% or less(non-condensing) |
| Vibration | 5.9m/s²maximum |
| Storage temperature | -10~70℃ |
2 phase nema 34 stepper motor


Please kindly contact with us if you need other specification stepper motor

Shirley
Overseas Project Manager
Tel : +86 1364027566
Email: shirley.fu@beudmke.com
WhatsApp: +86 13640275665
Skype: shirleyfu96
Address: No.244, shixing road, kengtou village, naicun town, Guangzhou, Guangdong, China







